Nail Care

How to Clean and Sanitize Stainless Steel Cuticle Tools

The Cuticle-B-Gone stainless handle with the wide paddle attached and three more attachments beside it on a white background.
Official Cuticle-B-Gone product photo.

A clean tool is part of good cuticle care. Stainless steel makes that easy, as long as you build the habit.

Quick answer. After each use, wash your stainless cuticle tool with soap and warm water to clear away skin and debris, then wipe or spray it with rubbing alcohol and let it air dry before storing. For a set with screw-on attachments, take them apart so you can clean the handle and each attachment. Keep the tool for your own use.

That's what our product page recommends for Cuticle-B-Gone: "Sanitize with rubbing alcohol."

What's the difference between cleaning and sanitizing?

Cleaning removes what you can see. Sanitizing is the step after.

Cosmetologist Stanley Nolan told Byrdie that cleaning and sanitizing are two different things: "Cleaning removes debris, dirt, and more from the surface." Sanitizing comes after.

The order matters. Alcohol works best on a tool that's already been washed, so cleaning always comes first.

Why does stainless steel matter?

Stainless steel is easy to wipe clean, so you can wash and wipe the tool down again and again.

Porous tools are a different story. In the same Byrdie piece, nail technician Sarah Hilton notes that most nail files and buffers are porous and "shouldn't be reused." Emery boards and foam buffers wear out and are hard to get fully clean.

Cuticle-B-Gone is all stainless steel, handle and attachments. The product page says it plainly: "All 4 attachments are fully sanitizable."

How do you clean and sanitize a stainless cuticle tool?

This takes a couple of minutes after each session. Work over a clean towel so small attachments don't roll down the drain.

  1. Take it apart. Unscrew the attachment from the handle so you can clean each piece separately.
  2. Wash with soap and warm water. Scrub each piece with a soft brush or cloth to clear away skin and debris, paying attention to the textured surface and the join where the attachment screws on.
  3. Rinse and dry. Rinse well and pat each piece dry with a clean towel.
  4. Apply rubbing alcohol. Wipe or spray every surface of the handle and each attachment with rubbing alcohol.
  5. Air dry, then store. Let the pieces dry completely in the air before you reassemble the tool or put it away.

Hilton describes the same two-stage approach for cuticle pushers and most other home nail tools: scrub with soap and water, "then wipe it down or spray it with rubbing alcohol."

The Cuticle-B-Gone handle with the wide paddle attached, and the narrow paddle and two knife-edge attachments laid out separately.

Official Cuticle-B-Gone product photo.

How often should you sanitize?

Every time you use it. Our product page says to "clean with rubbing alcohol between uses."

Do it right after your session, not before the next one. Skin and debris are easier to wash off before they dry onto the surface. The care routine itself has its own rhythm, covered in how often to do cuticle care.

What about boiling or soaking?

You'll see other methods online. In the Byrdie piece, a brand founder describes boiling metal tools for about 30 minutes or soaking them in rubbing alcohol or hydrogen peroxide for about 30 minutes.

Those go beyond what we recommend for Cuticle-B-Gone. Our care instruction is the simpler one above: wash, then rubbing alcohol.

We also don't claim the tool can be made sterile at home. Salons have their own disinfectants and equipment, and their own rules for using them.

Should you clean it between toes and fingers?

Yes. If you do a pedicure and a manicure in the same session, wash and wipe the tool before you switch from feet to hands.

Hilton made a related point to Byrdie about porous files, which can carry bacteria "from your toes to your fingers." A washable tool lets you clean between the two instead.

The wide paddle is the attachment suited to toenails and larger nails, so you may only need to clean that piece mid-session. Clean every piece you used at the end.

What do you need?

You probably have all of it already.

  • Mild hand soap or dish soap
  • A soft brush, like a spare toothbrush, or a cloth
  • A clean towel
  • Rubbing alcohol, with a cotton pad or a small spray bottle
  • A pouch or case for storage

Keep rubbing alcohol away from your eyes and follow the bottle's label. Let the tool dry fully before it goes back in its pouch.

Can you share a cuticle tool?

We'd rather you didn't. A personal set is easier to keep clean when it's only ever touched your own hands.

If someone else in the house wants to try it, a second set keeps things simple. That's also why the set makes a practical gift.

Should you bring your own tools to the salon?

Many people do, and it's a reasonable choice. The American Academy of Dermatology suggests that if you get frequent manicures and pedicures, you "consider purchasing your own tools to be used at the salon."

Clean and sanitize your set before you pack it, then again when you get home. Our founder, Barbara Gomes, has said her own manicurist "is a fan of using the Cuticle-B-Gone tool" (She Owns It).

Your nail tech still decides what works for their service. CBG complements salon care; it doesn't replace it.

How should you store a stainless cuticle tool?

Dry, together, and away from the damp.

Do Skip
Air dry fully first Packing it wet
A clean pouch or case A loose drawer
Keep pieces together Mixing with used files
A dry shelf Leaving it in the shower

A small zip pouch keeps the four attachments from going missing. If you travel, our guide to packing cuticle tools in a carry-on covers packing.

Good habits around your tool

Wash your hands before you start, too. A clean tool on unwashed hands only gets you halfway.

Soapy hands being washed under a chrome faucet at a white bathroom sink.

Photo: Ivan S / Pexels.

  • Work on clean, dry nails, or right after a shower.
  • Buff dead skin only, never live skin.
  • Skip any finger that's red, swollen, sore, or broken.
  • Clean the tool before it goes back in its pouch.

When to stop

If the skin around a nail swells, hurts, or looks different, leave it alone and don't use any tool on it. The AAD advises seeing a dermatologist if your nails change, swell, or cause pain.

Signs it's time to look closer

Check your set now and then in good light. Stainless steel holds up well, but look for anything that's changed.

  • Debris stuck in the texture after washing. Scrub again with a soft brush.
  • If the screw join feels gritty, clean and dry it before putting the attachment back on.
  • If an attachment is bent or damaged, stop using that piece and email hello@cuticlebgone.com.

Why we made it washable

Our founder designed Cuticle-B-Gone with her two daughters after filing her mother's hangnails instead of cutting them. Her mother was a breast cancer survivor living with lymphedema, and a small cut near a nail was something to avoid.

They chose stainless steel and four screw-on attachments, made by a manufacturer in the Midwest. Keeping it clean at home stays simple: soap, water, and rubbing alcohol.

"Just say no to cutting your cuticles."

Barbara Gomes, Founder & Inventor

One tool, easy to keep clean

Stop cutting. Start buffing. One Tool. Four Jobs. Zero Blades.

The Cuticle-B-Gone 4-piece set is $29.95, with one stainless handle and a wide paddle, narrow paddle, and left and right knife-edge attachments. It's a no-cut alternative to cuticle removers and nippers you can wash and wipe down after every use.

Shop the Cuticle-B-Gone 4-piece set


Frequently Asked Questions

How do I sanitize Cuticle-B-Gone?

Wash each piece with soap and warm water, dry it, then wipe or spray it with rubbing alcohol and let it air dry. Our product page says to sanitize with rubbing alcohol between uses.

Do I need to take the attachments off to clean them?

Yes, it's best to. Unscrewing the attachment lets you clean the handle and the base of the attachment separately.

Can I boil my stainless cuticle tool?

Some sources describe boiling metal nail tools, but it isn't part of our care instructions. We recommend soap and water followed by rubbing alcohol.

Is cleaning the same as sanitizing?

No. Cleaning removes visible debris; sanitizing is the next step. Clean first, then use rubbing alcohol.

Can I bring my own cuticle tool to the salon?

Yes. The AAD suggests that people who get frequent manicures and pedicures consider buying their own tools to be used at the salon. Your nail tech decides how it fits their service.

Can I sanitize the tool between toes and fingers?

Yes, and it's a good habit. Wash the attachment you used on your toes, wipe it with rubbing alcohol, and let it dry before you move on to your fingers.

How should I store it?

Fully dry, with all the pieces together, in a clean pouch or case on a dry shelf.

About Cuticle-B-Gone

This guide was written by the Cuticle-B-Gone team. Founder Barbara Gomes co-created the bladeless cuticle file with her two daughters.

Barbara and the brand have been featured in She Owns It, Jersey's Best Magazine and Canvas Rebel Magazine. Read the full story on Our Story.

This is at-home nail-care guidance. It isn't medical advice, and it doesn't replace a dermatologist or a trained nail professional.